Scotty Cameron Large Thread Putter Weights – Red (Pair)

Scotty Cameron has used two different weight threads over the years, and they look very similar at a glance. The only reliable way to tell is to remove one of the weights currently in your putter with a pin-style weight wrench and look at the threaded post. The large thread post is noticeably wider in diameter with coarser threads; the small thread post is narrower with finer threads.

These weights are large thread and will not thread into a small thread putter. Thread type can vary by model year even within the same putter series, so please verify against your actual weight rather than relying on the model name alone. If you are unsure, send us a photo of your existing weight before ordering and we will confirm it for you.

Yes. These weights are precision-machined to match the factory large thread dimensions and seat flush in the sole pocket with no gaps or wobble. Installation feel is consistent with the OEM part and they use the same pin-style weight wrench.

These are aftermarket components manufactured by 704 Clubworks and are not produced by, affiliated with, or endorsed by Titleist or Scotty Cameron. Brand names are referenced solely to indicate fitment.

A general rule in club fitting is that every 2 grams of head weight change shifts swing weight by roughly one swing weight point. Because putter sole weights come in pairs, moving from a 10g pair to a 15g pair adds 10 grams of total head weight — about five swing weight points — so the jumps are larger than they look.

If you have installed a heavier aftermarket putter grip or a counterbalanced grip, stepping up to a heavier pair helps restore the head feel that the added butt weight takes away. If you have shortened the putter, a lighter pair can bring swing weight back into range. Most fitters recommend changing one variable at a time and re-measuring on a swing weight scale between adjustments.

Each order quantity of 1 includes one matched pair — two (2) weights of the same gram value in your selected option. This is the correct quantity to reweight a single putter, since Scotty Cameron models take one weight per side of the sole.

Multiple weights, gram options, or finishes may appear in our listing photos to showcase the available range, demonstrate installation, or provide product context — but a single quantity at checkout means one pair will be shipped. If you need to weight more than one putter, adjust your quantity at checkout or add each gram option individually to your cart.

Listed gram values refer to each individual weight, not the combined pair. A 10 Gram selection ships two 10-gram weights for 20 grams of total added head weight.

Due to standard manufacturing tolerances, the exact weight of each component may vary slightly from the listed gram value. Our target tolerance is ±0.5 grams, and in practice our components frequently exceed that standard — meaning real-world variance is often even tighter than our published tolerance.

For context, golf club heads from major manufacturers typically carry a tolerance of ±1–2 grams, and golf grips and shafts often have similar or larger variances. Our ±0.5g target is held to a higher standard than most of the components already in your bag.

These minor variations do not significantly impact performance and are well within accepted industry standards. Please review these tolerances before purchasing. By placing an order you acknowledge these variations as a normal part of precision manufacturing. If you have any questions before ordering, feel free to contact us.